The working principle

When water enters the coarse screen from the outside (the coarse strainer is set according to the water quality), the coarser impurities are filtered and then enter the fine screen, then the smaller impurities are blocked on the inner filtering element. The filtered water then flows out through the outlet.

The self-cleaning mode can be started by pressing, timing, or manual three ways, following the principle of pressure difference.

When the internal and external pressure difference reaches the set value,  the self-cleaning mode starts. Drainpipe hydraulic valve open, sucking the scanner to produce negative pressure suction nozzle inside, absorbing impurities, at the same time sucking scanner in under hydraulic motor along the inside surface mesh does reciprocate screw movement, no cleaning blind area, impurities by the discharge outlet.

The cleaning time of the self-cleaning filter is set by the controller in advance, the drain valve is closed after cleaning, and little water loss in the cleaning process.

Model selecting

Filter Components

Irrigation Filtration Solution

To get the best filtration effect, improve water quality, and protect irrigation systems, different types of filters should be combined according to a different types of raw water.

Site Installation

If you have any question, welcome to contact info@irricdfs.com

Or whatsapp by 0086 18573132583