Operating parameters

1. Working pressure 0.1.5MPa~1.0MPa.

2. Water temperature <70℃ 

3. PH 5~11.5 

4. Filtering range 20~400 microns.

5. Backwash pressure 0.1MPa-0.2MPa.

6. The flow rate of backwashing is 8~18m³/h, and the backwashing time is 40 seconds.

7. Water consumption for backwashing is 50L (water consumption for a single backwashing).

8. The controller voltage is 6V, and the electromagnetic head pulse is 12-40V

The working principle

When water enters the coarse screen from the outside (the coarse strainer is set according to the water quality), the coarser impurities are filtered and then enter the fine screen, then the smaller impurities are blocked on the inner filtering element.The filtered water then flows out through the outlet.

Drain pipe hydraulic valve open, sucking the scanner to produce negative pressure suction nozzle inside, absorbing impurities, at the same time sucking scanner in under hydraulic motor along the inside surface mesh do reciprocating screw movement, impurities by the discharge outlet.

Features

1. The self-cleaning filter system adopts stainless steel 304 or 316 material with thickened mesh core and international first-class standard. Filtration can be aimed at different types of suspended particles.

2. The interchangeability of the interface ensures the diversity of filters and compact design. 

3. The back washing can be completed within 40 seconds. The back washing water consumption is less than 0.5% of the filtered water generally.(50L-80L backwash water consumption)

4. It is cleaned by the water input source. Due to the small water consumption,the water output of the equipment has no obvious influence.

5. The filtration and back washing of the system are carried out at the same time, the pressure and flow loss caused by the automatic maintenance of the system are small.

6. There are 100μ,130μ, and other specifications for choice according to water quality.